Thingiverse

VerticleThruster Mount

von archav2

24 Downloads

11 Likes

0 Makes

This mount was used and created by the Sea perch(Underwater Robotics) Team the Sea Biscuits.It was used to vertically mount 12v DC motors in casings to a piece of 1/2in PVC piping secured by a zip tie. Design and modeling help came from Caterpillermiller.
Follow him at: http://www.thingiverse.com/caterpillermiller/

*Note: If you use the stl File you must change the scale from 100% to 1,000%

motor mount pvc rov thruster thrust bearing thrust stand underwater vehicle motor mount pvc rov thruster thrust bearing thrust stand underwater vehicle

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

VerticleThruster Mount

Ähnliche Modelle

Zur Sammlung hinzufügen