Thingiverse
Vesa Mount Shelf
por M_Stone_
4
Descargas
1
Likes
0
Makes
A shelf to suit vesa 100x100 style mounts on the back of screens.
The shelf is 200mmx100mm of surface area and the bracket has a width of 5mm.
If using in conjunction with another bracket you will need longer m4 screws around 15-20mm, otherwise if you are using it without anything else you will only need the vesa standard screws of m4x10mm.
Can be printed upright or laying on it's flat surface, unsure which would be stronger but weren't designed for a heavy duty application.
The shelf is 200mmx100mm of surface area and the bracket has a width of 5mm.
If using in conjunction with another bracket you will need longer m4 screws around 15-20mm, otherwise if you are using it without anything else you will only need the vesa standard screws of m4x10mm.
Can be printed upright or laying on it's flat surface, unsure which would be stronger but weren't designed for a heavy duty application.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!