Slicer Discord
Vevor binocular microscope storage basket – 3D-printbaar model van Thingiverse Thingiverse

Vevor binocular microscope storage basket

door Charlez951
0 Downloads
0 Likes
0 Makes
Model downloaden
This storage basket is for a Vevor multi-directional binocular microscope with spring-loaded folding arm stand.
This can be use to store microscope lenses, objective caps, eyepieces and various tools... Very handy!

There are currently three different models of these Vevor microscopes. This basket is designed and fits the geometry of the least expensive of the three models. (see: https://www.vevor.com/multi-sided-microscope-c_11135) These three variations all seem to share the same critical dimensions for this project.
They have the same materials (except the accessories) and very similar geometry (except the arms which are longer and the plates are thicker). But if in doubt, check your measurements against the model and leave a comment on your findings.

The basket is centered around the main steel shaft. You have to unfold the microscope arm a little bit away from the steel shaft to let the basket slide in from the top, then slide it down until it rests on the microscope arm joint.
Bron
Thingiverse
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

1 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie