vex push backPark Zone

This model is built based on the venue of the VEX PUSH BACK competition. However, since the actual venue has not been obtained yet, a 1:1 restoration cannot be guaranteed. This component is a testing machine used to check whether the vehicle's chassis can pass through. As I used an A1 mini device for printing, I split the components into scattered parts and used multiple discrete connecting parts. If you use other larger - sized printers that can print with a maximum side length of up to 20.08 inches (51 cm), you can directly use the complete connecting strip I provided. Theoretically, a 1:1 restoration of the original venue can be achieved (provided there are no manufacturing errors). Note that the connecting strip is of a universal design, and only the channel part needs to be modified. It is recommended to use printing consumables with relatively high strength. If you need a complete model similar to the above, you can print the channel part three times. However, due to the limi