VHS Tape Cleaner V2

TLDR; I fixed the crank and made it better (Printed and tested), and I added phillips and hex attachments for a power drill (the Phillips adaptor seems to work well, the hex adaptor doesn't last very long when printed in PLA, but may last longer if printed with a stronger material). The main body is unchanged as that seems to work fine. More detail below:

Crank:
Upgraded the crank so that A) The handle fits nicely. The original did not work for me as it was too small to snap in. B) This arm is shorter so you can wind faster. The original was too long. If you wanted to print two cranks (for winding forward and backward without having to remove handle and plug it into the other cog), you should now be able to do that without the two cranks colliding C) The plug actually fits in the slot of the cog, as the original plug was too long. D) I added a cutout for easier removal of the crank.
Instructions: Either print the crank as one solid piece with the appropriate support (My attempt at t