MakerWorld
Hueforge & Lithophane
VictorianBeachDay
by Corp
9
Downloads
12
Likes
3
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. X and Y can be adjusted but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Gray Transmission Distance: 2.5PLA BambuLab Basic White Transmission Distance: 6This print uses 3 unique filaments, Substitute as needed. Swap Instructions:Start wi
Sign in to leave a comment
Sign in