Viking 200x200

Project: Viking 200x200.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 1.04mm The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #18 (1.52mm) swap to Blue Gray At layer #22 (1.84mm) swap to Ash Gray At layer #25 (2.08mm) swap to Ivory White for the rest. I have made the Base layer just a little thicker. This makes it so the it comes out thicker. I have also included a height modifier to help minimize the print times. Hope you enjoy