Thingiverse
Viking Sword
von 3D-Laser
142
Downloads
100
Likes
1
Makes
A simple Viking sword.
I designed this piece to be printed in four sections. The full blade is roughly 600mm long and is meant to be printed on my Raise3d Pro2 Plus. I also included a 3 piece file for the Ladies and gentlemen without such excessive Z-Height
It is designed to use two M5 Threaded rods Running the full length of the sword
It can also be constructed with the 3D Printed Rods which I have included.
Glue Is necessary for strength
Threaded Rod Dimensions: x2 M5x585mm
you will need two nuts - Washers are optional but recommended
Some support is necessary, but make sure that none is generated in the threaded rod holes.
NOTE: If you want a longer Blade, stretch the middle and Point Pieces in slicer.
Please Let me know if you print this as Id love to see!'
and if you want to customize it, feel free
I designed this piece to be printed in four sections. The full blade is roughly 600mm long and is meant to be printed on my Raise3d Pro2 Plus. I also included a 3 piece file for the Ladies and gentlemen without such excessive Z-Height
It is designed to use two M5 Threaded rods Running the full length of the sword
It can also be constructed with the 3D Printed Rods which I have included.
Glue Is necessary for strength
Threaded Rod Dimensions: x2 M5x585mm
you will need two nuts - Washers are optional but recommended
Some support is necessary, but make sure that none is generated in the threaded rod holes.
NOTE: If you want a longer Blade, stretch the middle and Point Pieces in slicer.
Please Let me know if you print this as Id love to see!'
and if you want to customize it, feel free
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
