Vileda head socket strenghtened

I had a broken head socket.
I broke off all the pieces. Sanded down to the base.
The base of the head socket is glued in to the handle. So I drilled 16mm hole in the middle.
I was drilling 4x3.5mm holes on the handle (from the side at the dents) for the securing screws.
I printed the socket head side way with support. (This way you will get the most strenght of it) Also modified the original. This has a larger OD. You can insert The printed socket in the 16mm hole. I drilled 1.5mm holes for the screws. And secure it on the side with screws.
I was printing it with 100 percent infill. To get the maximum strenght.