vinyl plotter

Vinyl cutting plotter, as cheap as possible.

List Of Parts:

Arduino Uno
CNC Shield
Drv8825
x2 Nema17 Stepper Motors
2020 V or G-Slot (as long as you want)
x5 M8 Threaded Rods
x1 M10 Threaded Rod
x2 Smooth Rods
3mm thick plywood or similar
30*30FAN
20 Tooth GT2 Pulley
6mm GT2 Belt
4 Spings
420 Sandpaper
A lot of 10mm orings
16 M8 Nuts
2 608ZZ Bearings
And Some M3, M4, M5 Screws and Nuts
12mm Alum Tube.
9G Micro Servo
The "Guia Vinilo" it's optional, not very necessary, but useful.
The lenght of the Belt, the rods, the plywood, the profile, it depends on your needs, depending on how wide you want it to be.

The "Soporte M10" you need to miror it, you need 2 of them.

I include the GRBL code wich I used, Iused lasergrbl to send the pieces to be cut.

It's a finished project, i used it, and it works verry well, but it's not perfect, you could improve it, I wold like to see your makes.

If you wish, you can follow us on Instagram. @Syntaxis3D