Thingiverse
Vinyl Record Wall Mount
von kanders
73
Downloads
92
Likes
0
Makes
This is a vinyl record wall mount inspired by Q Mounts https://www.kickstarter.com/projects/1295498551/q-record-wall-mounts
Place one mount at each corner of the record sleeve in a 13" square. Cross-line laser levels are very helpful for this. Records will easily slide in and out. This is designed to be used with #6 diameter screws in 1" or 1 1/4" length. Screw holes are NOT counter sunk, for ease of printing, so use pan-head/sheet-metal screws.
EDIT:
I re-did this design in OpenSCAD. Made it a little taller to accommodate double and tripple LPs. Uploading the .scad file and the .stl file.
Place one mount at each corner of the record sleeve in a 13" square. Cross-line laser levels are very helpful for this. Records will easily slide in and out. This is designed to be used with #6 diameter screws in 1" or 1 1/4" length. Screw holes are NOT counter sunk, for ease of printing, so use pan-head/sheet-metal screws.
EDIT:
I re-did this design in OpenSCAD. Made it a little taller to accommodate double and tripple LPs. Uploading the .scad file and the .stl file.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
