Violet Evergarden Stamp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x110.66mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic lilac purple Transmission Distance: 4 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Basic lilac purple At layer #17 (1.44mm) swap to Matte Lilac Purple At layer #26 (2.16mm) swap to Ivory White for the rest. Printed with two slots for 3/4" Long x 3/8" Wide x 1/32" Thick Rectangular Plate shaped magnets