Virtual Pinball / Arcade Controller

DIY controller for virtual pinball - 2 Pieces that will need to be glued + 2 Lids / bottoms with screw holes.

Built using an EG Start DIY arcade kit from amazon, featuring an extra hole for a plunger.

The flipper buttons are placed almost exactly where a real pinball tables would be, not having a slanted table makes it feel a bit different but the height SHOULD be spot on.

I have also included an _altcontrols version of V2 with the magnasave buttons on top rather than next to the flippers. It's better for Arcade games this way + people would mistakenly mess up the lighting on VPX tables.

If you intend to add a physical plunger, will also need macro switches. quickly designed a bracket to hold the switches I used, as well as a piece to slip onto the plunger to hit the switch. In the EG Start button kit was 1 extra wire with the board connections. I stripped one end of the extra wire and soldered it to the macro switch and mapped this to Analog left (down) for some games that sup