Vive Link Box Mount

This exquisite mounting bracket, painstakingly modeled from scratch, offers a snug fit that's been tested on both the original Vive Link Box and the newer Vive Pro. The integrated front and rear ridges prevent the box from slipping out when you plug or unplug cables. Generous clearance is provided for connector housings and (on the Vive Pro) the power button. An alternate version with stylish vent slots is included, particularly useful if printing in more rigid material as it yields slightly more flexible retaining clasps. If you have difficulty pressing the box straight down onto the clasps, try sliding it in from the front or back, at a slight angle until it clears the lip. You can mount the Vive in nearly any direction - forward, backward, upside down - to any surface - ceiling, wall, shelf, etc. It mounts with lose fitting #6 screws spaced 36mm apart (or tight fitting #8's). Both brackets have been printed directly on the build platform at 0.1mm layer height on the Form 2 in Tough v5 resin, but they should work fine on other printers. All design files are included so you can tailor it to suit your needs. Global variables make it easy to change clearances, wall thickness, and snugness of the clasps.