Thingiverse
Vivilink/VanTop rear camera window case
door IamSLy
15
Downloads
8
Likes
0
Makes
Case for mounting the rear view camera of the Vivilink/VanTop dash cam directly on the rear window.
Limitation: designed for rear windows that are close to vertical.
Downwards Slant Angle is parametric in Onshape: https://cad.onshape.com/documents/e8f55711fa27770a1eeec703/v/e5942c2b57b00328943a6fd5/e/d35997832f2da28dbd0fec3b
Slant Angle here is optimised for Expert 3/Vivaro C/Jumpy 3/ProAce 2
Printing:
Your slicer settings MUST have the "Horizontal Expansion" (Cura name) setting calibrated so that a X mm cylinder will fit into a X mm hole. This setting could have an other name in slicers other than Cura. A typical value for FDM printers is around -0.1mm. A more negative value will give a larger clearance.
This point is important as there is no clearance in the object dimensions!
Tool for calibrating your Horizontal Expansion setting: https://www.thingiverse.com/thing:4905876
STL FILES UPDATED ! Rotated the camera 180 deg as the reverse image was upside down and ther
Limitation: designed for rear windows that are close to vertical.
Downwards Slant Angle is parametric in Onshape: https://cad.onshape.com/documents/e8f55711fa27770a1eeec703/v/e5942c2b57b00328943a6fd5/e/d35997832f2da28dbd0fec3b
Slant Angle here is optimised for Expert 3/Vivaro C/Jumpy 3/ProAce 2
Printing:
Your slicer settings MUST have the "Horizontal Expansion" (Cura name) setting calibrated so that a X mm cylinder will fit into a X mm hole. This setting could have an other name in slicers other than Cura. A typical value for FDM printers is around -0.1mm. A more negative value will give a larger clearance.
This point is important as there is no clearance in the object dimensions!
Tool for calibrating your Horizontal Expansion setting: https://www.thingiverse.com/thing:4905876
STL FILES UPDATED ! Rotated the camera 180 deg as the reverse image was upside down and ther
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!