VMP-2 Charging Handle

A simple replacement charging handle designed to accept an M5 x 30mm socket cap bolt Shown here in eSun PETG-CF Please be warned that this can damage your nozzle over time as it impacts the end of the bolt with every cycle, ideally you would use a longer bolt and strip all the thread from the last few mm such that it does not scrape across the top of the nozzle but still impacts on the nozzle retraction catch. As it is with a 30mm bolt the tip should be just short of scraping on the nozzle sides, and impact as much as possible the catch to spread the load, but still it is not ideal.