VOID Ergo S

The VOID Ergo S is a 3d printed, handwired, split keyboard running QMK Firmware on Pro Micro controllers. Bill of materials46 diodes (tme.eu/aliexpress)44/46 cherry mx style switches24 AWG (0.2 mm2) wire2 x Pro Micro (aliexpress)2 x EC11 Rotary Encoder (optional - aliexpress mounted to the plate using this adapter)10 x M2x12 allen head screws (aliexpress, 14mm overall length, 4mm diameter head)10 x M2 brass inserts (aliexpress, 3.5mm outer diameter)2 x PJ320A 3.5mm female audio connectors (aliexpress)1 x 6x6x6 push button (aliexpress)hot glue for securing the Pro Micros to the bottom case(optional, but recommended) Printing the modelsAll models have been saved with the correct orientation; if for whatever reason they are not loaded correctly in your slicer, print them as it follows:The bottom parts should have their bottom faces touching the build plate.Supports are not necessary, but I'd recommend using them as the ports will print with less imperfections. The right case might thr