Thingiverse
Volcom Snowboard Stomp Pad
di Dr_ke
3
Download
13
Likes
0
Makes
I made this Stomp Pad in honor of the 2022/2023 Snowboard Season! Be kind & safe out there!
If you need a bigger point on the stomp pad then increase only the Z seam height.
When attaching to your Snowboard I recommend either Acrylic 2 sided Carpet Tape or Gorilla Glue Command Strip tape with 60LBS of strength. Make sure the board is clean before application.
I only recommend printing with TPU or similar flexiable filament. Other filaments may work but I am unsure if it will hold up under constant use and the cold weather.
If you do print this please leave a comment with a photo!
If you need a bigger point on the stomp pad then increase only the Z seam height.
When attaching to your Snowboard I recommend either Acrylic 2 sided Carpet Tape or Gorilla Glue Command Strip tape with 60LBS of strength. Make sure the board is clean before application.
I only recommend printing with TPU or similar flexiable filament. Other filaments may work but I am unsure if it will hold up under constant use and the cold weather.
If you do print this please leave a comment with a photo!
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
