Volume Controller with built in LEDs

This is my version of deej controller. (It's an an open-source hardware volume mixer for Windows and Linux PCs. It lets you use real-life sliders (like a DJ!) to seamlessly control the volumes of different apps) (https://github.com/omriharel/deej)
Here's the wiring and assembly guide.(https://www.instructables.com/id/Hardware-Volume-Mixer-for-PC-With-RGB-LEDs/)

First you should check if your hardware matches the model. If not, you should look for an other on the github mentioned above. (13mm hole for the button, 80mm between the center of the two mounting holes of the pots)

You will need to print 1 of the following:
Bottom V2.stl ; Top Wall.stl ; TopPlate.stl
And four of theese:
Backlight Diffuser.stl ; Backlight Wall.stl ; Led Bracket.stl

You can print the top plate both upside down, and upside up depending on what kind of top surface you want.

Also the models are NOT in printing oriantation. (Should fix that)

Update:
Added files 'LED bracket (LED strip).stl' an