Cults3D
Tool
Go to Model
Volvo OBD Reader
0
Downloads
0
Likes
0
Makes
Slim casing for OBD 1.5 diagnostic reader for old Volvo
Does not matter which pins you choose. I chose 9-12 because my soldering iron destroyed pins 1-4.
Uses 2 x M3x10 countersunk screws and M3 threaded inserts.
IFAC = Ignition, Fuel, ABS, Cruise
READ CODES: hold button ~2 sec.
RESET CODES: hold button 5< sec, LED lights up, hold button another 5< sec.
Parts needed:
5mm LED
OFF-ON button (max 7mm diameter)
rotary switch 1 pole 12 way non shorting (max 26,7mm diameter)
OBD2 male connector
wire
STEP files included for easier modification.
Wiring diagram provided.
Does not matter which pins you choose. I chose 9-12 because my soldering iron destroyed pins 1-4.
Uses 2 x M3x10 countersunk screws and M3 threaded inserts.
IFAC = Ignition, Fuel, ABS, Cruise
READ CODES: hold button ~2 sec.
RESET CODES: hold button 5< sec, LED lights up, hold button another 5< sec.
Parts needed:
5mm LED
OFF-ON button (max 7mm diameter)
rotary switch 1 pole 12 way non shorting (max 26,7mm diameter)
OBD2 male connector
wire
STEP files included for easier modification.
Wiring diagram provided.
epa720 also publishes on
11 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
