Voron 2.4 Power Switch Relocation

These files modify the skirt of the voron 2.4 (300) to move the power switch from the rear of the unit to the front.

The front L.H.S. skirt is modified to accept a 3 prong rocker switch that requires a 1 1/8 inch (28.6 mm) by 9/16 inch (14.3 mm) mounting hole. I used a Hillman 42760 rocker switch (available from Lowes) but any similar switch will work.

The rear skirt is modified to accept a power module that does not include a power switch. I used a CESS Snap In AC Power Inlet with Fuse Holder (available from Amazon)