Voron 2 Speaker bracket

Example video: I wanted my printer to say funny things when it started up, started printing, finished printing, screwed up,etc. So I went on aliexpress, as you do, found this:https://www.aliexpress.com/item/1005006235994736.html?spm=a2g0o.order_list.order_list_main.40.70501802PtCfMtWhich is a unbeleivably cheap, crappy usb speaker, but it does work well enough. Some things to note:you need to disassemble the speaker, there is a hidden screw on the rounded back under a little plastic cover thing, I pulled that out with a dental pick. drill two clearance holes for m2 screws through the center of the back case of the speaker, you'll see there are two round extrusions in there to support the speakers, just eyeball it, drill a 2 or 2.5mm hole (cant remember what I used, start small…)attach the back to the bracket, put the speaker back together, then mount the lot to the riser, and extrusion in your electronics bayMake sure you turn the usb power limit up on your pi, in raspi-config, as