Voron 30° side camera mount

voron侧向30°摄像头支架Voron Side-Mounted 30° Camera Bracket这是一个适配voron三叉戟摄像头的侧向支架，已调整角度为最佳观察打印板的角度，侧面隐蔽，好走线，且对封箱和打印头运动无干涉摄像头为🍑买的免驱摄像头，直接把usb连接上位机（如果没有多余接口可以买一个hub/分线器），在ssh中查找摄像头id，然后在crowsnest配置文件中改上，在fluidd的设置中添加摄像头即可This is a side-mounted bracket compatible with the Voron Trident camera. Its angle has been adjusted to the optimal position for viewing the print bed. It is concealed on the side, facilitates cable management, and does not interfere with the enclosure assembly or the movement of the print head.The camera used is a plug-and-play (driver-free) camera purchased from Taobao (a major Chinese e-commerce platform).Connect the USB directly to the host computer (if there is no extra port, you can purchase a hub/splitter). To set it up, first locate the camera ID via SSH, then update this ID in the Crowsnest configuration file, and finally add the camera through the settings in Fluidd.