VORON Alternative PSU Case

This is a remix of the PSU case of the VORON core-XY printer by /u/russiancatfood

This allows using a standard Chinese PSU (198x98x42) instead of the Meanwell S-201-12 (215x115x50mm) which is expensive and difficult to find because it's discontinued. It also allows using a genuine or fake Fotek relay (60x45x22.5mm) instead of the Omiron relay (58x43x27mm).

Note that the heatbed connector is relocated a bit because the PSU case is smaller than the original one and there just isn't enough room in the original location. The IEC socket is also rotated to make space.

The PSU is only fitted with 2 screws, which is enough but not as strong as the original one.