Slicer Discord
Voron Handles – 3D-Druckmodell von MakerWorld MakerWorld
3D Printer Accessories

Voron Handles

5 Downloads
3 Likes
1 Makes
Zum Modell
Created some handles for my Trident since I don't like the way the stock ones come. I recommend the low profile (labeled as "_LP") ones as they are less bulky, and I prefer them personally. Magnets should be able to slide and stay in without glue, but it doesn't hurt to add some. May also be worth installing weaker magnets to where the stock ones are to make it opening and closing the doors smoother, but honestly works fine with the stock ones. BOM:Printed Parts x1 (Of each)6x3 Magnets x4VHB Tape Install:Apply VHB tape to the back of both handlesAttach one side of the handles to where you want them to be and flush to the acrylic panel Attach the other side with the magnets to ensure the logo lines up properly and verifyPress down and secure handles to the panelsCompleteIf you have any questions or have any recommendations for improve don't hesitate to reach out. Thank you y'all!
Kategorie
3D Printer Accessories
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen