Thingiverse
Voronoi Sphere (two layer abstract)
von findme1
93
Downloads
76
Likes
1
Makes
RECOMMENDED PRINT: (I used an out of the box ender 3, so it should print for most.)
Layer Height: 0.12mm (Super quality in your slicer program, I use cura.)
Nozzle Diam: 0.4mm
Supports: YES (Use your slicers auto generated supports. It only adds about 15-20 min)
USE A RAFT/Floor for your print to keep the first few layers from messing up.
I used the raft setting in cura.
This is basically a dual layered 3d voronoi sphere I made in blender. I am working on some ideas around it. This one prints well and is surprisingly tough, i would imagine most average people would have a hard time crushing it between two fingers.
Let me know what you think! Support me with downloads and comments for more work! I want to supply a large list of cool things for people!
If you are unfamiliar, you can google Voronoi for other cool math sculptures.
Layer Height: 0.12mm (Super quality in your slicer program, I use cura.)
Nozzle Diam: 0.4mm
Supports: YES (Use your slicers auto generated supports. It only adds about 15-20 min)
USE A RAFT/Floor for your print to keep the first few layers from messing up.
I used the raft setting in cura.
This is basically a dual layered 3d voronoi sphere I made in blender. I am working on some ideas around it. This one prints well and is surprisingly tough, i would imagine most average people would have a hard time crushing it between two fingers.
Let me know what you think! Support me with downloads and comments for more work! I want to supply a large list of cool things for people!
If you are unfamiliar, you can google Voronoi for other cool math sculptures.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
