Thingiverse
Vortex 285 V2 Antenna Mount
von Made2Fade
10
Downloads
3
Likes
0
Makes
Version 2 - 90 degree antenna mount to suit IRC Vortex 285 racing quad. This one has been beefed up a little. These are used in pairs for antenna diversity.
Bolt these to the top plate above the side skirts... you will need some slightly longer m2.5 bolts. The bottom plate bolts are longer than the top plate. If you have a crash kit then you can use the longer bolts to hold the antenna mount on the top plate.
Print both the left and right hand sides.
Pictures to follow.
Bolt these to the top plate above the side skirts... you will need some slightly longer m2.5 bolts. The bottom plate bolts are longer than the top plate. If you have a crash kit then you can use the longer bolts to hold the antenna mount on the top plate.
Print both the left and right hand sides.
Pictures to follow.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
