Vortex Fruit Washer (Size L)

Vortex Fruit Washer (Size L) Whoever came up with this type of device was clearly someone with an engineer’s spark. I don’t know the name of the original creator, but one thing’s for sure — it’s a brilliant idea. You can find dozens, maybe even hundreds, of similar fruit and berry washers online. I reviewed quite a few 3D models and was just about ready to print one, but as often happens, I noticed some design choices that, in my opinion, didn’t seem fully thought through. So, as usual, I decided to make my own.   And I’m really happy with how it turned out. You can see exactly how the washer works in a short video I made specifically for this. A few notes on printing At first, I planned to print it in PETG, but at that moment, white and yellow-green PLA were already loaded in the AMS — so I went with those. The combo worked out well, at least in my opinion. I actually have a soft spot for white and green, so the choice felt natural.     Printing went smoothly. Tree supports held the bottom structure well — but fair warning: they’re pretty dense in my 3MF file. If that’s not your thing, feel free to adjust them. In the video, you’ll notice I lightly sanded the surface — not to perfection, but for something this functional, that’s more than enough. Design details The water inlet channel has a fairly steep slope — from an engineering standpoint. That sharp drop ensures a strong flow, even with medium faucet pressure. Despite the bowl’s decent size (19 cm in diameter), the vortex is powerful and spins fruits and berries efficiently for a thorough rinse.   One key detail: the center tube. Many models I saw have it sealed at the top — and I think that’s a design flaw. Mine is intentionally left open and sits slightly lower than the outer slots in the bowl. This lets the flow carry small debris and particles toward the center, where it drains straight into the sink. Excess water escapes through the side slots, which stay unclogged. The center works as a natural drain — cl