Slicer Discord
VW T4 parking camera – Modelo 3D imprimible de Thingiverse Thingiverse
VW T4 parking camera – Bild 1 VW T4 parking camera – Bild 2 VW T4 parking camera – Bild 3 VW T4 parking camera – Bild 4 VW T4 parking camera – Bild 5 VW T4 parking camera – Bild 6
Automotive

VW T4 parking camera

24 Descargas
51 Likes
0 Makes
Ver Modelo
Edit: for latest version check my printables site as I keep it updated more often:
https://www.printables.com/cs/model/328785-vw-t4-parking-camera

Fixture to install parking camera in VW T4.

Camera is placed inside of the car (on the upper side of tailgate) so it isn't affected by rain/snow etc and you can see wider angle than if it was placed above the registration plate as it usually is. Disadvantage is that you actually don't see the very end of your car so you can't park like milimeter close but the viewing distance is very close so it is perfectly usable.

I use it with wifi camera that connects to smartphone but it will work with any other that fits inside - dimensions 23 x 23 mm.

The printed part has 3 slots for magnets d10 x 4 mm (I used 10x3mm) and the camera is pressed inside. There are also two positioning pins that will fit into holes already present in your car and will ensure the camera is placed in the middle of the car.

For cable management I recommend us
Categoría
Automotive
Fuente
Thingiverse
Publicado
Lo que necesitas para imprimir: Intermedio Baja confianza
Pieza única Tornillería requerida
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Cama mín.
23 mm (Pequeño)
Postprocesado
Tornillería
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección