VzBoT

High speed 3D printer! (Not for commercial production! License protected) MIGRATED TO GITHUB: https://github.com/VzBot3D/VzBot THIS WILL NOT BE UPDATED ANYMORE AND WILL GO AWAY SOON If you wish to support me: https://ko-fi.com/vez3d Running with the EVA slightly modded print Head and Nova HotEnd WITH long grove mount. (Grove mount here: https://store.3dpassion.com/collections/store/products/copy-of-nova-groove-mount-adaptor-2?variant=29535946637410 ) SliceEngineering discount link : https://www.sliceengineering.com?p=ryvDNs-j_ Or use this code: SIMOV5 PS: All stop switches are using EK1713 style switches (https://www.amazon.ca/Gikfun-Micro-Switch-Arduino-EK1713/dp/B06XMQG4TC/ref=sr_1_9?dchild=1&keywords=micro+switch&qid=1632172813&sr=8-9) Update 2021-10-11 -New Beta released with upgraded Z assembly. For Beta testers only. Not official yet. Please report any issue. -New 10mm rod mounts, with built-in clamps, stiffer, stronger -new Lead screw mounts, stiffer stronger -new Z single motor mounts. - Modified XY motors top mount so E3D HT motor longer shafts fit in -Added Z chain mount on the bed assembly. Re-use the stock X5S chain mount Update (VzBoT 1.1 2021-09-20) -Big update ! All gantry reworked. -New nema17 motor mounts. Now stronger with top part holding it -New ODrive/Nema23 External mounts -New Y gantry. inspired by the Aluminum gantry shape design from Diemex. Parts are now fully compatible between alu and printed. Spacers embedded in the design -New corner Idlers mount. Spacers included in the design. Belt path updated to facilitate assembly -Belt/pulley alignment issue fixed everywhere. New EVA back plate + front plate modded for the VzBoT belt path. New Belt tensioner for 6mm belt -Including a MGN12 mount for the EVA Updates (2021-09-08): - Belt alignment fixed. redesigned tensioners and belt grabbers - Added option X end-stop mount for those not wanting to use sensorless homing - Updated EVA top mount (stronger) - EVA logo added on printhead Updates (2021-