Wade & Ember Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben Wade & Ember Hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 1.1mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 1.12mmThe Max allowed Thickness is 3.84mm and the Actual Thickness is 3.48mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.1 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffff7c PLA BambuLab Basic Yellow Transmission Distance: 5.2 #5e43b7 PLA BambuLab Basic Purple Transmission Distance: 1.8 #67b4ff PLA BambuLab Basic Cyan Transmission Distance: 2 #f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.7This print uses 7 unique filaments ***attached .3mf file prints the first 4 layers at 0.25mm then the rest at 0