Wago connector box

I had an LED panel that was normally supposed to be wired up directly to a wall switch but I put it on a plug so I could move it around the house. While moving it there was always this wago connector my plug connected to and I didn't like the exposed wire. This box puts the 2 cables in a nice case so it feels a little more safe. Always make sure there are no exposed wires when clamping the connector down! The box prints in 2 parts, a lid and a box. They are press fit together with tight tolerances so they stay connected. The connector that came with my ceiling light was 20.5mm wide and around 30mm in length, the height was 10.5mm. The way the box is set up is so that it can support connectors up to 35mm in length. The 2 holes for the cable are 5.5mm and 7.5mm in diameter since my own wire was thicker than the wire that the light came with.