Slicer Discord
Wall 3x4'' /w Door – 3D printable model from Thingiverse Thingiverse

Wall 3x4'' /w Door

44 Downloads
38 Likes
0 Makes
Go to Model
A 3 by 4 inch wall with a door. The door frame has enough holes to accommodate door hinges in 4 position - the door can be rigged to open to the front, back, left and right. Thus, the door itself has to be symmetrical. This is a design compromise to favor interchangeability. The downside is that the unused 3 sets remain open. Looking at the pics, they kind of appear like small alcoves where to put a candle, so IMO the design shortcut doesn´t hurt that much. The door fits into the frame when closed and can rotate from 0 to slightly over 90 deg. The opening is about 20mm wide and 40mm high, i.e. slightly bigger than a standard indoor door when adjusted for scale. Normal people have plenty of room, Astartes will have to angle their pauldrons. On the upside, a single Astartes can hold this door pretty much forever.
Source
Thingiverse
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection