Tools
Zum Modell
Wall Control Pegboard Tool Hangers
674
Downloads
375
Likes
3
Makes
This is the beginning of a project to make tool holders that work with [Wall Control](https://www.wallcontrol.com/) peg boards. 3D printing pegboard accessories wasn't very successful for me, particularly with a metal pegboard -- the pegs would snag and break too easily when moving the item.
But my pegboard is by Wall Control, which also supports slots! Rather than try to print hangers, instead I've created a "bracket" that you can use with the [7/8" Wall Control hook](https://www.amazon.com/Wall-Control-10-HS-001-Pegboard-Standard/dp/B00YHCZ156/)
You'll need one for each end. Insert each hook into the Wall Control slots and the 3d printed brackets slides right over them.
My first design is a pliers holder for 8 pliers (13mm x 34mm rounded rectangle)
NOTE: The Hanger STL (and iges/step files) are for integration into remixes - you don't need to print them. The hanger is 5/8" wide and its center needs to be a multiple of 1" (2.54mm) from the opposite one. Build your t
But my pegboard is by Wall Control, which also supports slots! Rather than try to print hangers, instead I've created a "bracket" that you can use with the [7/8" Wall Control hook](https://www.amazon.com/Wall-Control-10-HS-001-Pegboard-Standard/dp/B00YHCZ156/)
You'll need one for each end. Insert each hook into the Wall Control slots and the 3d printed brackets slides right over them.
My first design is a pliers holder for 8 pliers (13mm x 34mm rounded rectangle)
NOTE: The Hanger STL (and iges/step files) are for integration into remixes - you don't need to print them. The hanger is 5/8" wide and its center needs to be a multiple of 1" (2.54mm) from the opposite one. Build your t
rrauenza veröffentlicht auch auf
27 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!