Robotics
Voir le modèle
Wall-e Eyes from Adafruit
52
Téléchargements
51
Likes
0
Makes
Wall-e eyes for chillibasket Wall-e
I’ve used:
Spooky Arduino Halloween Eyes
At
https://www.youtube.com/watch?v=uYIc1pLO6Xk
by Werny
Circuit for wiring the ItsyBitsy is from 2 min 30 – 3 min 10 of the video
Werny is running two screens off each CS pin, and we want one screen of each CS Pin.
So CS1 is for the Left Eye (Pin 12) and CS2 is for the Right Eye (Pin 10)
He also changes the resistor to 68 Ohms so you can run the LED off 5 volts (Why? But do it anyway)
I used the
Adafruit ItsyBitsy M0
To get the ItsyBitsy working go to:
https://learn.adafruit.com/introducing-adafruit-itsybitsy-m4
Make sure you get the “Blink” code working on the ItsyBitsy before you carry on.
Use Adafruits code
Uncanny eyes
https://learn.adafruit.com/animated-electronic-eyes
Follow the instruction to the word. Do not try and take short cuts.
When you download the code and run it on the Arduino IDE, open the “config.h” second tab and change:
{ 12, 0, 1 }, // LEFT EYE display-select a
I’ve used:
Spooky Arduino Halloween Eyes
At
https://www.youtube.com/watch?v=uYIc1pLO6Xk
by Werny
Circuit for wiring the ItsyBitsy is from 2 min 30 – 3 min 10 of the video
Werny is running two screens off each CS pin, and we want one screen of each CS Pin.
So CS1 is for the Left Eye (Pin 12) and CS2 is for the Right Eye (Pin 10)
He also changes the resistor to 68 Ohms so you can run the LED off 5 volts (Why? But do it anyway)
I used the
Adafruit ItsyBitsy M0
To get the ItsyBitsy working go to:
https://learn.adafruit.com/introducing-adafruit-itsybitsy-m4
Make sure you get the “Blink” code working on the ItsyBitsy before you carry on.
Use Adafruits code
Uncanny eyes
https://learn.adafruit.com/animated-electronic-eyes
Follow the instruction to the word. Do not try and take short cuts.
When you download the code and run it on the Arduino IDE, open the “config.h” second tab and change:
{ 12, 0, 1 }, // LEFT EYE display-select a
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !