Wall Hung Planter

A succulent planter or pot designed to be hung on the wall. The planter features three "keyhole" slots on the back. One centered, two on either side, with 3" (~76.2mm)spacing between them. I wanted to give the option to use one centered nail, or two... in the event your plant gets heavy. Also, I appreciate knowing the distance between the mounting holes. As uploaded, it's 150mmx150mmx105mm, with a 10mm thick wall and radiused corners around.

I recommend printing on its back and using supports to support the front (see picture). I have printed without supports, and technically it worked, but results were less than optimum.

For mine, I sanded the outside up to 220 grit, this gave it an almost pottery or ceramic finish. Wife approved. I did print with an extra perimeter to allow for sanding.

If there are any questions, fire them my way and I'll do my best to answer.