Wall Mount Button for Wemos D1 Mini

A small, clean case with a snap fit lid and integrated push button (6x6x5) and a Wemos D1 Mini. There are holes for wall mounting. There is also some room for a small LED if you wish; in mine I'm using an addressable RGB (NeoPixel style).

It's small so it can fit anywhere. Dimensions for 50mm x 45mm (about 2 inches x 1.75 inches).

I developed this as I often need a small wall-mount button for various projects. I'm using mine as a garage remote lockout with my RatGDO garage controller running ESPHome. LED changes color to determine garage door lockout status.

You will only need supports for the rear Wemos mount part. I printed mine in PETG, as the button has an integrated hinge and PETG tends to be more flexible.

You'll need:

1. Wemos D1 Mini (ESP8266 version)
2. Tactile push button/micro switch momentary contact, dimension 6x6x5mm but may work with a 6x6x4.5mm button as well.
3. Some glue for the button (I used CA / superglue). You want to keep the push button as