Wall-Mount Drawers

This double drawer is designed to mount on the wall and give a surface to set things on as well as provide two drawers. It is designed to be pretty much as large as possible and still be printable on an A1 mini. There are four holes in the back to allow it to be wall-mounted, although it could sit on a dresser top or table and still allow the drawers to pull out. It takes a lot of filament (made the profile very strong to allow for wall-mounting) but it turned out well and the drawers slide in and out smoothly. The inside cavity of the drawers is about 5.75" (~146mm) wide, 5.25" (~133mm) long, and 2.5" (~63mm) deep. If you need exact dimensions, please check yourself before printing as I gave the one I printed to my son so I cannot measure the physical model at this time. You need to print 1 base unit (Plate 1) and two drawers (2x Plate 2). I included a test print (~1" of the back of a drawer) on plate 3 that can be used to make sure that the drawer fits well with your