wall mount for smart switch

This model is a mounting accessory designed to adapt a standard smart wall switch of 86mm x 86mm size to fit an old wall cutout size of 124mm x 124mm. The old wall cutout has a bracket with a screw spacing of 83.5mm x 46mm, making it suitable for mounting in this hole. The old wall cutout is likely to be commonly installed in residential buildings such as apartments in Korea. It should be suitable for existing about 3 to 6 gang switches. Measure first and determine if it is compatible. It has been adjusted to allow smooth 3D printing without the need for supports. 한국의 구축 아파트에서 흔하게 쓰이는 약 125x125mm의 3~6구 벽스위치 위에 표준형 86x86mm의 스마트 스위치를 고정하기 위한 마운트입니다. 본인 스위치의 타공 크기 먼저 확인 후 출력하세요. 출력할 때 서포트를 만들지 않고 출력이 가능하도록 안쪽에 일부 곡선으로 처리하였습니다.