Slicer Discord
Wall Mount PlayStation 5 Disk Slim – Left Side – 3D-Druckmodell von MakerWorld MakerWorld
Organizers

Wall Mount PlayStation 5 Disk Slim – Left Side

137 Downloads
61 Likes
78 Makes
Zum Modell
A strong and practical wall mount for the PlayStation 5 Slim Disk Edition. Designed for maximum stability, easy installation, and full access to all ports.⸻⚙️ Bottom Part• The console is secured with an M3 bolt and washer.• Includes 6 extra M3 holes for future projects (e.g., controller or headset mounts).• Mounted to the wall with 6 screws with washers (hole Ø 4.2 mm, washer Ø 9.2 mm).• After installation, cover plates can be mounted on to hide the screw points.⸻🔒 Top Part• Uses the same type of screws (recommended without washers).• First, install the bottom mount and fix the console, then position and install the top part (roughly centered).• The top piece is printed as a single part with a lock mechanism for 100% secure holding.• The lock can be opened or closed.• Foam or soft pads are recommended to protect the console’s surface.⸻🧼 Additional Advantages• Full access to all ports.• The console can be removed easily — no need to unscrew the wall mount.• Top screws can be hidden wi
Kategorie
Organizers
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen