Wall Mounted Filament Spool Holder - Command Strip

This is a wall-mounted filament spool holder. It attaches to the wall with Command strips. So you do not have to use screws or put holes in your walls. I adapted Adam L's excellent SpoolPerch model to accommodate almost any kind of spool, as long as it has a center diameter of at least 47 mm, and a width of around 70 mm or less. This should be most spools. I enlarged the base (that attaches to the wall) so that it will accommodate the largest of Command strips, and I removed the cutouts at the bottom that require supports to print. The largest Command strips can support as much as 5 pounds (2.26 kg) for each pair. This wall mount should use two pairs, which together should hold as much as 10 pounds (4.52 kg). Even if you don't use the largest Command strips, you should have no trouble holding a 1kg spool of filament, which is only around 2.5 pounds (including the spool itself). But please read the specifications of the particular Command Strips that you choose. I hope you like