Home Decorations & Ornaments STL Download - Wall Mounted Geckosby That3DBalloonGuy

Mounting Your 3D Printed Gecko:Materials Needed:2 screws (4mm in diameter)Wall anchors (if needed for added support)DrillScrewdriverMeasuring tapeInstructions:Prepare Your Space: Find the perfect spot on your wall where you want to hang your gecko.Measure and Mark: Use a measuring tape to mark two points on the wall 30mm apart. Ensure the points are level to avoid a tilted gecko.Drill Holes: Drill pilot holes at the marked points. If you’re using wall anchors, follow the instructions on the packaging for the appropriate hole size.Insert Screws: Insert the two 4mm screws into the pilot holes, leaving about 5-10mm of the screw head protruding from the wall. This will allow the 3D printed model to slot over them securely.Mount the Gecko: Align the holes on the back of your 3D printed gecko with the screws on the wall. Carefully slide the model over the screws until it’s firmly in place.Secure and Adjust: Make any small adjustments to ensure your gecko is level and securely mounted.Admire Your Work: Step back and admire your new wall-mounted gecko!