Slicer Discord
Wall Mounted Headphone Holder – 3D printable model from MakerWorld MakerWorld
Office

Wall Mounted Headphone Holder

448 Downloads
73 Likes
156 Makes
Go to Model
This is a simple headphone holder that I designed in just a few minutes. It features a hook on the back that can be screwed directly into the wall, giving it a seamless attachment. The screw holes are sized fairly generously—I used relatively large screws, so it should work for a wide range of applications. I’ve also included the STEP files in case anyone wants to make modifications. This design is open for any use, commercial or otherwise; I wanted it to be completely open and accessible. The print file already has the supports in the correct places, but the only area that really requires support is the flat part at the very front. On my printer the hook cavity itself does not need any supports, but if necessary, add support to ensure a clean print. I printed it at 0.28 mm with 15% infill, but it should work with other settings as well—feel free to adjust it to your needs.
Category
Office
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

1 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection