wall shelf floating style

This is a nice shelf with wall mounted bracket, honeycomb pattern and inward angled sides! The area where the holes for the screws are placed is reinforced with 100% infill. This way you don't have to worry about damaging anything when tightening the screws. Some woodscrews of 5mm diameter and the corresponding wall- pegs will be needed to mount the bracket to the wall. Print instructions:nozzle 0,40mmmanual tree support is recomended only for the mounting holes of the bracket, the honeycomb pattern dosn’t need support layer height 0,20mm2 wall loopstop/bottom shells 4 layerstop/bottom shell thickness 0,80mmsparse infill 10%sparse infill pattern “gyroid”set brim to “outer brim only”brim width 5mmBefore printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For build plate adhesion, apply a thin, even coat of your preferred adhesiv. I repeat the process every 5-6 prints.Before printing, make