Slicer Discord
Wall SSD Holders - 3 Compartments – 3D printable model from MakerWorld MakerWorld
Electronics

Wall SSD Holders - 3 Compartments

6 Downloads
3 Likes
0 Makes
Go to Model
SSD Wall Holder for SATA and External Hard Disks Slot Sizes:1 - 127 x 78 x 16 mm | External Hard Disk2 - 101 x 75 x 11 | SATA Disk with side screws3 - 101 x 71 x 11 | Normal-Sized SATA SSD (Obviously you can use all the slots for Normal-Sized SATA SSD's but you won't be able to fit More than 1 External Hard Disk or more than 2 SATA Disks with side screws)I also made the slots slightly bigger due to temperature shrinking depending on other 3d printers. This is my first ever 3d model all made by myself without tutorials, comments are open to criticism and remix's are also available. It was initially made to screw it to the wall but you could put it on your table as well. Printing INFO · Material - PLA+· Printing Weight - 83.21g ≈· Printer Used - Ender 3 V3 KE· Printing time - 3h 12m ≈ (Depends on Slicer Settings)· Infill - 5%· Supports - No· Raft - No
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Medium confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
127 mm (Medium)
Est. print time
3 h
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Wall SSD Holders - 3 Compartments?
Any FDM printer should handle Wall SSD Holders - 3 Compartments just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 127 mm is recommended.
How long does it take to print Wall SSD Holders - 3 Compartments?
According to the design notes, Wall SSD Holders - 3 Compartments takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Wall SSD Holders - 3 Compartments available in?
Wall SSD Holders - 3 Compartments is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Wall SSD Holders - 3 Compartments free to download?
Yes, Wall SSD Holders - 3 Compartments is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection