Slicer Discord
Wall thickness reference and benchmark/test – 3D-Druckmodell von MakerWorld MakerWorld
Test Models

Wall thickness reference and benchmark/test

von Erik · Test Models
648 Downloads
283 Likes
399 Makes
Zum Modell
How thick should the wall of a model be? I had no idea. So I modeled something to test different wall thicknesses! Boost Me Now I have something I can use as a reference, but also a great stress test and material reference. Whenever I get some new PLA or a different nozzle, I can print this with different temperatures, infill, print speed, temperature and tons of other variations. It helps me understand modeling and sizing, but also improves my understanding of printing and slicing! How should I calibrate my settings? How strong is the result? I can test it now! The print features walls of 0.4/0.8/1.2/1.6/2.0/2.4/2.8/3.2mm thickness. The cilinders have the same thickness. The long part of each wall is 40mm, and the short part is 10mm. The cilinders have a diameter of 10mm. Printing with “Detect thin wall” enabled made a big difference for me! Curious to hear what settings others use 🙏🏿
Kategorie
Test Models
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Erik veröffentlicht auch auf

194 zusätzliche Modelle auf 3 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen