Thingiverse
Wansview Camera Mount Anycubic I3 Mega
von ml_blh
24
Downloads
15
Likes
0
Makes
Camera Mount for the Wansview IP-Camera. Fit at left or right side of an Anycubic I3 Mega.
The holes can be used for the cable,but the .stl without the holes is easier to print.
I added a version with holes and a seperate head. Its easy to print but you must glue the two parts together.
If you want to use the mod to print ABS, the mod must also made out of ABS. PLA
can become soft by higher bed temperatures. If you only want to print PLA, the mod can made out of PLA.
The holes can be used for the cable,but the .stl without the holes is easier to print.
I added a version with holes and a seperate head. Its easy to print but you must glue the two parts together.
If you want to use the mod to print ABS, the mod must also made out of ABS. PLA
can become soft by higher bed temperatures. If you only want to print PLA, the mod can made out of PLA.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
