WANTED - NAMI

NAMI Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 144.97x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.8mm and the Actual Depth is 2.4mm Filaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled Red Transmission Distance: 4.4 PLA Smart Recycled Yellow Transmission Distance: 9.3 PLA Smart Recycled White Transmission Distance: 5.7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #13 (1.16mm) swap to Red At layer #19 (1.64mm) swap to Yellow At layer #21 (1.8mm) swap to White for the rest.