Slicer Discord
Wardrobe Light Ikea (universal) – 3D-Druckmodell von Thingiverse Thingiverse

Wardrobe Light Ikea (universal)

1 Downloads
1 Likes
0 Makes
Zum Modell
I made a light to light up in the dark, because the room light is not bright there.

It is for the Ikea Wardrobe system and need just 2 sizes of Bolts for wood up to 4mm with straight head. the Cable chanels were fixed with double sided Tape.

The Light is able to adapt in angels free on will but there need to be a gap in the wardrobe to fit the light.

there is one Microswich used per light it can be swiched one by one or when both doors were open or when just master door is opened. newertheless it needs a door to fix ;-)

The Swich Housing and light´s and cable Guides can be inverted to be symetrical ;)

"Keil" can be adapter in height to solve some small steps for the cable channel for more sticky surface and to fill the gap.

Feel free to adapt and modify

Things used:

https://a.aliexpress.com/_EHONbnJ

https://a.aliexpress.com/_ExKwIM9

Cable

Battery tray can be 3xAA or AAA=4,5V or 4x rechargeable AA(A) battery's =4,8V
Alternatively usb powerbank-supply 5
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Wood PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen