Warewolf #2 HueForge with frame

I've included a mini frame for this. It prints in less than an hour and the print can be superglued to the frame or I have been using glue dots that are mostly used in scrapbooking. The frame prints great with the satndard .2 print profile. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mm Filaments Used: PLA Bambu Labs Black Transmission Distance: 0.1 PLA Bambu Labs Brown Transmission Distance: 1.2 PLA Bambu Labs Orange Transmission Distance: 5.5 PLA Bambu Labs Jade White Transmission Distance: 5.9This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.64mm) swap to Brown At layer #8 (0.8mm) swap to Orange At layer #10 (0.96mm) swap to Jade White for the rest.